Quickhub 1 4 – Quickly Access Github

QuickHub 1.4 – Quickly access GitHub. January 12, 2012. QuickHub is a tiny but useful OS X application for GitHub lovers. It helps you to quickly access to GitHub. The following is supposed to give you an quick overview over the major features of Vampirism. There are small features, adjustments or tweaks which are not mentioned here (advancements, some loot gen, mob interaction and more). Vampire mobs spawn in the same biomes zombies spawn. They are night active and hunt for non-vampire players.

• Quickhub 1 4 – Quickly Access Github Chrome
• Quickhub 1 4 – Quickly Access Github Commands
• Quickhub 1 4 – Quickly Access Github Mysql
• Quickhub 1 4 – Quickly Access Github Server

QB64 is completely free and open source, check out our GITHUB repository. Over 50 years of BASIC compatibility and (as close as we can get without being an emulator like DOSBOX) 100% compatible with MS QBASIC/QB4.5 code. Create networked applications and games easily using our TCP/IP interface. Load common image formats such as GIF, BMP, PNG. QuickHub is a tiny but useful OS X application for GitHub lovers. It helps you to quickly access to GitHub directly from your status bar: Repositories, issues, gists, pull requests, organizations and users are just one click away. QuickHub will also notify you when something changes on your GitHub artifacts. 'When GitHub meets your OS X status.

RaspAP lets you quickly get a WiFi access point up and running to share the connectivity of many popular Debian-based devices, including the Raspberry Pi. Our popular Quick installer creates a known-good default configuration that 'just works' on all current Raspberry Pis with onboard wireless. A responsive interface gives you control over the relevant services and networking options. Advanced DHCP settings, OpenVPN client support, SSL, security audits, themes and multilingual options are included.

RaspAP has been featured on sites such as Instructables, Adafruit, Raspberry Pi Weekly and Awesome Raspberry Pi and implemented in countless projects.

We hope you enjoy using RaspAP as much as we do creating it. Tell us how you use this with your own projects.

Contents

Prerequisites

Start with a clean install of the latest release of Raspberry Pi OS (32-bit) Lite. The Raspberry Pi OS desktop and 64-bit beta distros are unsupported.

1. Update Raspbian, including the kernel and firmware, followed by a reboot:

2. Set the WiFi country in raspi-config's Localisation Options: sudo raspi-config

3. If you have a device without an onboard WiFi chipset, the Edimax Wireless 802.11b/g/n nano USB adapter is an excellent option – it's small, cheap and has good driver support.

With the prerequisites done, you can proceed with either the Quick installer or Manual installation steps below.

Quick installer

Install RaspAP from your device's shell prompt:

The installer will complete the steps in the manual installation (below) for you.

After the reboot at the end of the installation the wireless network will beconfigured as an access point as follows:

• IP address: 10.3.141.1
  • Username: admin
  • Password: secret
• DHCP range: 10.3.141.50 to 10.3.141.255
• SSID: raspi-webgui
• Password: ChangeMe

Note: As the name suggests, the Quick Installer is a great way to quickly setup a new AP. However, it does not automagically detect the unique configuration of your system. Best results are obtained by connecting to ethernet (eth0) or as a WiFi client, also known as managed mode, with wlan0. For the latter, refer to this FAQ. Special instructions for the Pi Zero W are available here.

Please read this before reporting an issue.

Ad Blocking

This feature uses DNS blacklisting to block requests for ads, trackers and other undesirable hosts. To enable ad blocking, simply respond to the prompt during the installation. As a beta release, we encourage testing and feedback from users of RaspAP.

Details are provided here.

Bridged AP

By default RaspAP configures a routed AP for your clients to connect to. A bridged AP configuration is also possible. Slide the Bridged AP mode toggle under the Advanced tab of Configure hotspot, then save and restart the hotspot.

Note: In bridged mode, all routing capabilities are handled by your upstream router. Because your router assigns IP addresses to your device's hotspot and its clients, you might not be able to reach the RaspAP web interface from the default 10.3.141.1 address. Instead use your RPi's hostname followed by .local to access the RaspAP web interface. With Raspbian default settings, this should look like raspberrypi.local. Alternate methods are discussed here.

More information on Bridged AP mode is provided on our wiki.

Simultaneous AP and Wifi client

RaspAP lets you create an AP with a Wifi client configuration, often called AP-STA mode. With your system configured in managed mode, enable the AP from the Advanced tab of Configure hotspot by sliding the Wifi client AP mode Microsoft word 2008 for mac help. toggle. Save settings and start the hotspot. The managed mode AP is functional without restart.

Note: This option is disabled until you configure your system as a wireless client. For a device operating in managed mode without an eth0 connection, this configuration must be enabled before a reboot.

Support us

RaspAP is free software, but powered by your support. If you find RaspAP useful for your personal or commercial projects, please become a GitHub sponsor, join the project on Open Collective or make a one-time donation with PayPal. Any of these options makes a big difference!

Manual installation

Detailed manual setup instructions are provided on our wiki.

802.11ac 5GHz support

RaspAP provides an 802.11ac wireless mode option for supported hardware (currently the RPi 3B+/4 and compatible Orange Pi models) and wireless regulatory domains. See this FAQ for more information.

Supported operating systems

RaspAP was originally made for Raspbian, but now also installs on the following Debian-based distros.

We find Armbian particularly well-suited for this project. Please note that 'supported' is not a guarantee. If you are able to improve support for your preferred distro, we encourage you to actively contribute to the project. Free vfx software.

Multilingual support

RaspAP uses GNU Gettext to manage multilingual messages. In order to use RaspAP with one of our supported translations, you must configure a corresponding language package on your RPi. To list languages currently installed on your system, use locale -a at the shell prompt. To generate new locales, run sudo dpkg-reconfigure locales and select any other desired locales. Details are provided on our wiki.

The following translations are currently maintained by the project:

• Čeština
• 正體中文 (Chinese traditional)
• 简体中文 (Chinese Simplified)
• Dansk
• Deutsch
• Español
• Finnish
• Français
• Ελληνικά (Greek)
• Indonesian
• Italiano
• 日本語 (Japanese)
• 한국어 (Korean)
• Nederlands
• Polskie
• Português
• Русский
• Svenska
• Türkçe
• Tiếng Việt (Vietnamese)

If your language is not in the list above, why not contribute a translation? Cdock dock customization for macos 3 0 8. Contributors will receive credit as the original translators.

HTTPS support

The Quick Installer may be used to generate SSL certificates with mkcert. The installer automates the manual steps described in the wiki, including configuring lighttpd with SSL support.

Simply append the -c or --cert option to the Quick Installer, like so:

Note: this only installs mkcert and generates an SSL certificate with the input you provide. It does not (re)install RaspAP.

More information on SSL certificates and HTTPS support is available on our wiki.

OpenVPN support

OpenVPN may be optionally installed by the Quick Installer. Once this is done, you can manage client configuration and the openvpn-client service with RaspAP.

To configure an OpenVPN client, upload a valid .ovpn file and, optionally, specify your login credentials. RaspAP will store your client configuration and add firewall rules to forward traffic from OpenVPN's tun0 interface to your configured wireless interface.

Note: this feature is currently in beta. Please read this before reporting an issue.

How to contribute

1. Fork the project in your account and create a new branch: your-great-feature.
2. Open an issue in the repository describing the feature contribution you'd like to make.
3. Commit changes in your feature branch.
4. Open a pull request and reference the initial issue in the pull request message.

Quickhub 1 4 – Quickly Access Github Chrome

Find out more about our coding style guidelines and recommended tools.

Reporting issues

Please read this before reporting a bug.

Contributors

Code Contributors

This project exists thanks to all the awesome people who contribute their time and expertise.

Financial Contributors

Become a financial contributor and help us sustain our community.

Individuals

Organizations

Support this project with your organization. Your logo will show up here with a link to your website.

License

See the LICENSE file.

Loading CSV Data with pgloader¶

CSV means comma separated values and is often found with quite varyingspecifications. pgloader allows you to describe those specs in its command.

The Command¶

To load data with pgloader you need to define in a command the operations insome details. Here's our example for loading CSV data:

The Data¶

This command allows loading the following CSV file content:

Loading the data¶

Here's how to start loading the data. Note that the ouput here has beenedited so as to facilitate its browsing online:

The result¶

As you can see, the command described above is filtering the input and onlyimporting some of the columns from the example data file. Here's what getsloaded in the PostgreSQL database:

Loading Fixed Width Data File with pgloader¶

Some data providers still use a format where each column is specified with astarting index position and a given length. Usually the columns areblank-padded when the data is shorter than the full reserved range.

The Command¶

To load data with pgloader you need to define in a command the operations insome details. Here's our example for loading Fixed Width Data, using a fileprovided by the US census.

You can find more files from them at the[Census 2000 Gazetteer Files](http://www.census.gov/geo/maps-data/data/gazetteer2000.html).

Here's our command:

The Data¶

This command allows loading the following file content, where we are onlyshowing the first couple of lines:

Loading the data¶

Let's start the pgloader command with our census-places.load command file:

We can see that pgloader did download the file from its HTTP URL locationthen unziped it before the loading itself.

Note that the output of the command has been edited to facilitate itsbrowsing online.

Loading MaxMind Geolite Data with pgloader¶

Quickhub 1 4 – Quickly Access Github Commands

MaxMind provides a free dataset forgeolocation, which is quite popular. Using pgloader you can download thelastest version of it, extract the CSV files from the archive and load theircontent into your database directly.

The Command¶

To load data with pgloader you need to define in a command the operationsin some details. Here's our example for loading the Geolite data:

Note that while the Geolite data is using a pair of integers (start,end) to represent ipv4 data, we use the very poweful ip4r PostgreSQL Extension instead.

The transformation from a pair of integers into an IP is done dynamically bythe pgloader process.

Also, the location is given as a pair of float columns for the longitudeand the latitude where PostgreSQL offers thepointdatatype, so the pgloader command here will actually transform the data onthe fly to use the appropriate data type and its input representation.

Loading the data¶

Here's how to start loading the data. Note that the ouput here has beenedited so as to facilitate its browsing online:

The timing of course includes the transformation of the 1.9 million pairsof integer into a single ipv4 range each. The finally step consists ofcreating the GiST specialized index as given in the main command:

That index will then be used to speed up queries wanting to find whichrecorded geolocation contains a specific IP address:

Loading dBase files with pgloader¶

The dBase format is still in use in some places as modern tools such asFilemaker and Excel offer some level of support for it. Speaking ofsupport in modern tools, pgloader is right there on the list too!

The Command¶

To load data with pgloader you need to define in a command the operations insome details. Here's our example for loading a dBase file, using a fileprovided by the french administration.

You can find more files from them at the Inseewebsite.

Here's our command:

Photo collage photo poster hd 3 4 2. Note that here pgloader will benefit from the meta-data information found inthe dBase file to create a PostgreSQL table capable of hosting the data asdescribed, then load the data.

Loading the data¶

Let's start the pgloader command with our dbf-zip.load command file:

We can see that pgloader did download the file fromits HTTP URL location then unziped it before the loading itself.

Note that the output of the command has been edited to facilitate itsbrowsing online.

Quickhub 1 4 – Quickly Access Github Mysql

Loading SQLite files with pgloader¶

The SQLite database is a respected solution to manage your data with. Itsembeded nature makes it a source of migrations when a projects now needs tohandle more concurrency, which PostgreSQL_ is very good at. pgloader can helpyou there.

In a Single Command Line¶

You can

Done! All with the schema, data, constraints, primary keys and foreign keys,etc. We also see an error with the Chinook schema that contains severalprimary key definitions against the same table, which is not accepted byPostgreSQL:

You may need to have special cases to take care of tho. In advanced case youcan use the pgloader command.

The Command¶

To load data with pgloader you need to define in a command the operations insome details. Here's our command:

Note that here pgloader will benefit from the meta-data information found inthe SQLite file to create a PostgreSQL database capable of hosting the dataas described, then load the data.

Loading the data¶

Let's start the pgloader command with our sqlite.load command file:

We can see that pgloader did download the file fromits HTTP URL location then unziped it before loading it.

Also, the WARNING messages we see here are expected as the PostgreSQLdatabase is empty when running the command, and pgloader is using the SQLcommands DROP TABLE IF EXISTS when the given command uses the includedrop option.

Note that the output of the command has been edited to facilitate itsbrowsing online.

Migrating from MySQL to PostgreSQL¶

If you want to migrate your data over to PostgreSQL from MySQL then pgloader is the tool ofchoice!

The following translations are currently maintained by the project:

• Čeština
• 正體中文 (Chinese traditional)
• 简体中文 (Chinese Simplified)
• Dansk
• Deutsch
• Español
• Finnish
• Français
• Ελληνικά (Greek)
• Indonesian
• Italiano
• 日本語 (Japanese)
• 한국어 (Korean)
• Nederlands
• Polskie
• Português
• Русский
• Svenska
• Türkçe
• Tiếng Việt (Vietnamese)

If your language is not in the list above, why not contribute a translation? Cdock dock customization for macos 3 0 8. Contributors will receive credit as the original translators.

HTTPS support

The Quick Installer may be used to generate SSL certificates with mkcert. The installer automates the manual steps described in the wiki, including configuring lighttpd with SSL support.

Simply append the -c or --cert option to the Quick Installer, like so:

Note: this only installs mkcert and generates an SSL certificate with the input you provide. It does not (re)install RaspAP.

More information on SSL certificates and HTTPS support is available on our wiki.

OpenVPN support

OpenVPN may be optionally installed by the Quick Installer. Once this is done, you can manage client configuration and the openvpn-client service with RaspAP.

To configure an OpenVPN client, upload a valid .ovpn file and, optionally, specify your login credentials. RaspAP will store your client configuration and add firewall rules to forward traffic from OpenVPN's tun0 interface to your configured wireless interface.

Note: this feature is currently in beta. Please read this before reporting an issue.

How to contribute

1. Fork the project in your account and create a new branch: your-great-feature.
2. Open an issue in the repository describing the feature contribution you'd like to make.
3. Commit changes in your feature branch.
4. Open a pull request and reference the initial issue in the pull request message.

Quickhub 1 4 – Quickly Access Github Chrome

Find out more about our coding style guidelines and recommended tools.

Reporting issues

Please read this before reporting a bug.

Contributors

Code Contributors

This project exists thanks to all the awesome people who contribute their time and expertise.

Financial Contributors

Become a financial contributor and help us sustain our community.

Individuals

Organizations

Support this project with your organization. Your logo will show up here with a link to your website.

License

See the LICENSE file.

Loading CSV Data with pgloader¶

CSV means comma separated values and is often found with quite varyingspecifications. pgloader allows you to describe those specs in its command.

The Command¶

To load data with pgloader you need to define in a command the operations insome details. Here's our example for loading CSV data:

The Data¶

This command allows loading the following CSV file content:

Loading the data¶

Here's how to start loading the data. Note that the ouput here has beenedited so as to facilitate its browsing online:

The result¶

As you can see, the command described above is filtering the input and onlyimporting some of the columns from the example data file. Here's what getsloaded in the PostgreSQL database:

Loading Fixed Width Data File with pgloader¶

Some data providers still use a format where each column is specified with astarting index position and a given length. Usually the columns areblank-padded when the data is shorter than the full reserved range.

The Command¶

To load data with pgloader you need to define in a command the operations insome details. Here's our example for loading Fixed Width Data, using a fileprovided by the US census.

You can find more files from them at the[Census 2000 Gazetteer Files](http://www.census.gov/geo/maps-data/data/gazetteer2000.html).

Here's our command:

The Data¶

This command allows loading the following file content, where we are onlyshowing the first couple of lines:

Loading the data¶

Let's start the pgloader command with our census-places.load command file:

We can see that pgloader did download the file from its HTTP URL locationthen unziped it before the loading itself.

Note that the output of the command has been edited to facilitate itsbrowsing online.

Loading MaxMind Geolite Data with pgloader¶

Quickhub 1 4 – Quickly Access Github Commands

MaxMind provides a free dataset forgeolocation, which is quite popular. Using pgloader you can download thelastest version of it, extract the CSV files from the archive and load theircontent into your database directly.

The Command¶

To load data with pgloader you need to define in a command the operationsin some details. Here's our example for loading the Geolite data:

Note that while the Geolite data is using a pair of integers (start,end) to represent ipv4 data, we use the very poweful ip4r PostgreSQL Extension instead.

The transformation from a pair of integers into an IP is done dynamically bythe pgloader process.

Also, the location is given as a pair of float columns for the longitudeand the latitude where PostgreSQL offers thepointdatatype, so the pgloader command here will actually transform the data onthe fly to use the appropriate data type and its input representation.

Loading the data¶

Here's how to start loading the data. Note that the ouput here has beenedited so as to facilitate its browsing online:

The timing of course includes the transformation of the 1.9 million pairsof integer into a single ipv4 range each. The finally step consists ofcreating the GiST specialized index as given in the main command:

That index will then be used to speed up queries wanting to find whichrecorded geolocation contains a specific IP address:

Loading dBase files with pgloader¶

The dBase format is still in use in some places as modern tools such asFilemaker and Excel offer some level of support for it. Speaking ofsupport in modern tools, pgloader is right there on the list too!

The Command¶

To load data with pgloader you need to define in a command the operations insome details. Here's our example for loading a dBase file, using a fileprovided by the french administration.

You can find more files from them at the Inseewebsite.

Here's our command:

Photo collage photo poster hd 3 4 2. Note that here pgloader will benefit from the meta-data information found inthe dBase file to create a PostgreSQL table capable of hosting the data asdescribed, then load the data.

Loading the data¶

Let's start the pgloader command with our dbf-zip.load command file:

We can see that pgloader did download the file fromits HTTP URL location then unziped it before the loading itself.

Note that the output of the command has been edited to facilitate itsbrowsing online.

Quickhub 1 4 – Quickly Access Github Mysql

Loading SQLite files with pgloader¶

The SQLite database is a respected solution to manage your data with. Itsembeded nature makes it a source of migrations when a projects now needs tohandle more concurrency, which PostgreSQL_ is very good at. pgloader can helpyou there.

In a Single Command Line¶

You can

Done! All with the schema, data, constraints, primary keys and foreign keys,etc. We also see an error with the Chinook schema that contains severalprimary key definitions against the same table, which is not accepted byPostgreSQL:

You may need to have special cases to take care of tho. In advanced case youcan use the pgloader command.

The Command¶

To load data with pgloader you need to define in a command the operations insome details. Here's our command:

Note that here pgloader will benefit from the meta-data information found inthe SQLite file to create a PostgreSQL database capable of hosting the dataas described, then load the data.

Loading the data¶

Let's start the pgloader command with our sqlite.load command file:

We can see that pgloader did download the file fromits HTTP URL location then unziped it before loading it.

Also, the WARNING messages we see here are expected as the PostgreSQLdatabase is empty when running the command, and pgloader is using the SQLcommands DROP TABLE IF EXISTS when the given command uses the includedrop option.

Note that the output of the command has been edited to facilitate itsbrowsing online.

Migrating from MySQL to PostgreSQL¶

If you want to migrate your data over to PostgreSQL from MySQL then pgloader is the tool ofchoice!

Most tools around are skipping the main problem with migrating from MySQL,which is to do with the type casting and data sanitizing that needs to bedone. pgloader will not leave you alone on those topics.

In a Single Command Line¶

As an example, we will use the f1db database from which which provides a historical record of motor racing data fornon-commercial purposes. You can either use their API or download the wholedatabase at http://ergast.com/downloads/f1db.sql.gz. Once you've done that load thedatabase in MySQL:

Now let's migrate this database into PostgreSQL in a single command line:

Done! All with schema, table definitions, constraints, indexes, primarykeys, auto_increment columns turned into bigserial , foreign keys,comments, and if you had some MySQL default values such as ON UPDATECURRENT_TIMESTAMP they would have been translated to a PostgreSQL beforeupdate triggerautomatically.

Quickhub 1 4 – Quickly Access Github Server

You may need to have special cases to take care of tho, or views that youwant to materialize while doing the migration. In advanced case you can usethe pgloader command.

The Command¶

To load data with pgloader you need to define in a command the operationsin some details. Here's our example for loading the MySQL Sakila SampleDatabase.

Here's our command: Macfamilytree 7 6 1 download free.

Note that here pgloader will benefit from the meta-data information found inthe MySQL database to create a PostgreSQL database capable of hosting thedata as described, then load the data.

In particular, some specific casting rules are given here, to cope withdate values such as 0000-00-00 that MySQL allows and PostgreSQL rejectsfor not existing in our calendar. It's possible to add per-column castingrules too, which is useful is some of your tinyint are in fact smallintwhile some others are in fact boolean values.

Finaly note that we are using the MATERIALIZE VIEWS clause of pgloader:the selected views here will be migrated over to PostgreSQL with theircontents.

It's possible to use the MATERIALIZE VIEWS clause and give both the nameand the SQL (in MySQL dialect) definition of view, then pgloader creates theview before loading the data, then drops it again at the end.

Loading the data¶

Let's start the pgloader command with our sakila.load command file:

The WARNING messages we see here are expected as the PostgreSQL databaseis empty when running the command, and pgloader is using the SQL commandsDROP TABLE IF EXISTS when the given command uses the include dropoption.

Note that the output of the command has been edited to facilitate itsbrowsing online. Keyboard maestro 8 2 – hot key tasking solution reviews.